BGM PRO Main Stand V2 => now with adjustable stop

ADVANTAGE ANSCHLAGGUMMI
The BGM PRO Main Stand with Soft Stop System makes an end to hard on the floor plate striking stand feet. The stand stop is now, as with the Vespa PX models, positioned on the stable mounting plates on the central frame tunnel.
The main stand is stopped here ideally via a rubber buffer, without setting the floor plate in vibration.
So not only is the noise when folding much more pleasant, the stand with Soft Stop technology also protects the frame. Cracks in the floor plate, caused by the original main stand, are thus forever history.

NEW Version V2
The stop rubber is now individually adjustable by means of thread. Thus, the main stand can be perfectly adjusted to the own vehicle as well as the desired distance to the frame. For example, the main stand can have an extra wide distance to the floor panel to be able to operate it very comfortably at any time. Conversely, the main stand can be adjusted close to the floor plate to always have maximum ground clearance available.

FRAme PROTECTIVE
The Soft Stop main stand is supplied including stand plates. These have additional approach plates against which the main stand rests. This avoids direct contact between the stand tube and frame and the frame is additionally protected (from the factory, the original Piaggio stand chafes directly on the painted floor panel!).

SUPPLY
For assembly, longer screws are needed, these are attached to the set. The main stand spring and stand feet can of course be used from the original stand further, but alternatively these can also be found in the accessories (below).

FAZIT: Very useful technical update, visually almost invisible!